At Coldwater Sintered Metal Products we can meet your powdered metal parts needs and you can be sure that you are getting the quality you deserve. Coldwater Sintered Metal Products can create metal parts from .0021oz up to 16 pounds. Complex, Multi-level powdered metal parts are our specialty. Examples of our parts can be viewed below.

This complex multi-level PM part is compacted to tight GD&T call outs from sinter hardened material. The secondary machining steps are held to +/- .00025 tolerance. We enjoy the challenge!

We produce this net shape PM part with no secondary machining steps. It has some tight true position requirements and the 5/8 diameter hole has a total tolerance of .0008 in. The part is then steam treated for surface finish and hardness.

This net shape Bevel Gear is compacted holding the ID of the spline bore to a total tolerance of .003. It is then copper infiltrated and sinter hardened to a 31 HRC.

This net shape Bevel Gear is compacted holding the ID of the spline bore to a total tolerance of .003. It is then copper infiltrated and sinter hardened to a 31 HRC.

This Gear Stem Pinion is a net shape PM part compacted with the .062 diameter center hole to specifications. There are two levels and a key way in the stem.

This Bronze Ring has thin walls that distort during the sintering process. It is coined after sintering in order to maintain the required shape.